Imprint / Disclaimer and General Terms

 

 

 

 

 

 

 

 

 

 

 

 

 

S-5-K-Grip-600-detail.jpg

K-Grip Clamp

 

 

S-5-K-Grip-Mini-detail.jpg

K-Grip-Mini clamp

 

 

 

 

 

 

 

 

 

 

K-Grip Inserts:

S-5-K-Grip-Inserts1.jpg

K-Grip Clamps for Domitec, Saflok, Klip-lok, etc.

The S-5-K-Grip-clamps were specifically developed     S-5-K_Grip-on-seam.jpg

to fit Domitec, Saflok, Klip-lok, Klip-Rib and other

similar bulb snap-together seams.

 

The design utilizes multiple inserts in order to accommodate a variety of

bulb snap-together profiles. Each insert has a unique shape that allows for

a tight fit and provides increased holding strength.

 

 

There are 2 options of S-5! K-Grip-Clamps

 

The K-Grip-Clamp with two bolts sideways (and one centered M8 thread on top and M8 stainless steel bolt) is used for heavy demands e.g. fall protection systems and in the ColorGard® snow retention. (20 pieces per box)

 

The K-Grip-Mini with one bolt sideways (and M8 thread and M8 stainless steel bolt on top)  are utilized in various instances when multiple clamps are required for the attachment of rigid objects to the seams. (40 pieces per box).
For a flange solutions we offer the stainless steel adapter plate.

 

The two different Inserts sold separately:
GX10- or GX50- Inserts for the K-Grip-Clamp (100 pieces per box),
GXM10- or GXM50- Inserts for the K-Grip-Mini  (200 pieces per box).

 S-5-K-Grip-auf-Falz.jpg K-Grip-Klemme.jpg   K-Grip-Mini.jpg
   

        S-5-K-Grip-Clamp

        and GX50 - Insert

            S-5-K-Grip-Mini

            and GXM10 - Insert

 

S-5-K-Grip-Schienenmontage-1.jpg S-5-K-Grip-Schienenmontage-2.jpg S-5-K-Grip-Mini-Renusol_mounting_system-2015.jpg
S-5-K-Grip-Mini with GXM10-Insert installed under different rail systems: easy to install and very strong.
 

Seam Profiles and the Insert Options:

 

With Insert S-5-GX10 or S-5-GXM10:

  • Domico Domitec
  • Lysaght Klip-lok® 406
  • Safintra Saflok 410
  • Safintra Saflok 700
  • McElroy Metal Mirage
  • AEP Span Klip-Rib®
  • Metal Sales Clip-Loc
  • SpeedDeck® SpeedDeck®
  • And other similar profiles

With Insert S-5-GX50 or S-5-GXM50:

  • Lysaght Klip-lok Classic® 700
  • Lysaght Klip-lok 700 Hi-Strength®
  • Stramit® Speed Deck Ultra®
  • Fielders KingKlip® 700
  • And other similar profiles

If you have a profile not listed here, please contact us.

 

The S-5-K Grip and S-5-K Grip Mini clamps are each furnished with the hardware shown above. A structural aluminum attachment clamp, the S-5-K Grip is compatible with most common metal roofing materials excluding copper. All included hardware is stainless steel.

 
To install the S-5-K Grip, place the clamp insert just under the fold of the rib at the desired location. Next, position the clamp by rolling it over the seam and the clamp insert piece, ensuring it is centered over the clamp insert with approximately 2 mm of insert overhang on each side of the clamp.

Don’t fix the clamps on or beside the clips! The thermal elongation of the panels may not be hindered!

By hand, partially thread the two flanged bolts into the base of the S-5-K Grip. The bolts should engage the divots in each end of the S-5-K Grip insert. Lastly, tighten the base bolts using a ratchet or screw gun with a 13 mm hex.  For optimal holding strength, bolts should be tensioned to 200 in. lbs.

Then affix ancillary items using the screw provided.

Please note the installation instructions (included in each box).

 

Please note:

Assumption is that the determination has been made that the roof to which the S-5! clamps will be attached is structurally adequate. Any loads imposed on the S-5! clamps will be transferred to the panels. Panel seams must have sufficient flexural strength to carry these loads. Panels must also be adequately attached to the building structure, and the structure must be sufficient to carry these loads. The makers and distributor of S-5! clamps make no representations with respect to these variables. It is the responsibility of the user to verify this information, or seek assistance from a qualified design or structural professional, if necessary.

ALWAYS PROVIDE WORKER FALL PROTECTION WHEN INSTALLING S-5! S-5 DOES NOT APPROVE PRODUCTS FOR USE IN PERSONAL FALL RESTRAINT/FALL PROTECTION APPLICATIONS. S-5 PRODUCTS MAY BE USED AS A COMPONENT IN A FALL PROTECTION SYSTEM ONLY WHEN THE SYSTEM MANUFACTURER PROVIDES APPROPRIATE APPROVALS. THE S-5! CLAMP IS NOT APPROVED FOR USE AS A PERSONAL FALL RESTRAINT DEVICE.

 

Installation instructions and and more information to download under: Information Downloads.

 

Futher information are available on the homepage of S-5! under: www.s-5.com.

 

No liability for printing errors. Technical changes subject to modification. 2-2015

© Copyright RoofTech GmbH and Metal Roof Innovations, Ltd.. Link to S-5! Therms of Use

S-5! products are protected by international patents of Metal Roof Innovations, Ltd..

 

 



 

 

00-S-5-Metal-Roof-Logo.gif

 

 

 

 

 

 

S-5-K-Grip-Installation.jpg

 

Download (pdf)

Installation Instructions

S-5-K-Grip Clamps

 

 

 

 

Profile - Examples:

 

Domico-Domitec-Profil.jpg

Profile Domitec from Domico

 

S-5-K-Grip-on-Saflok.jpg

Profile Safintra Saflock 700

  

Stramit-Speed-Deck-Ultra.jpg

Profile Stramit Speed Deck Ultra

  

S-5-K-Grip-Profil4.jpg

 Profile Lysaght Klip-lok 700 Hi-Strenght